2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 133Get this manual
BFBO-BFS.SC 10) Unfasten the wire bands and remove the pulse generator connector (Blue) and exciter coil connector (Green) and disconnect the connectors 11) Remove the two 25 mm flange bolts, connector bracket and ignition control module12) Remove the 14 mm flange bolt and bracket
BRACKET
WIRE BANDS
13) Unfasten the wire band at the starter magnetic switchRelease the charge coil wireDisconnect the starter cable from the starter magnetic switch by removing the mm self-locking nut (electric starter type only)14) Pull off the connectors from the connector holder, and disconnect the wire connectors of the;starter magnetic switch wire (electric starter type)charge coil wire15) Remove the two 14 mm flange bolts and connecto bracket