2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 132Get this manual
BFBD-BFS.SD 7) Disconnect the oil pressure switch terminal and remove the wire from the clamps on starter case B
SWITCH TERMINAL
STARTER CASE B
8) Remove the SE thermal valve wire connectors from the holder of the starter case and disconnect the connectors (electric starter type)
STARTER CASE B
CONNECTORS
9) Pull up the starter case slightly and disconnect the drain tube from the starter case B, and remove the 14 mm flange bolt and throttle cable stay, then disconnect the linkage pivot of the throttle cable from the carburetor throttle lever (tiller handle type only)