2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 109Get this manual
SFBO-SFS.SD 2) Place new O-ring on the replacement pilot screw, and install it on the carburetor3) Turn the pilot screw in until it is fully seated, then turn the screw out the required number of turnsCarburetor ID NoBJ05B (with SE thermal valve) Carburetor ID NoBJ05A (with SE valve) Carburetor ID NoBJ02B (with SE thermal valve) Carburetor ID NoBJ02A (with SE valve)
LIMITER CAP
Pilot screw opening
BF8D, BFP8D
218 turns out
3 turns out
BF9.9D, BFP9.9D
STOPPER
2 turns out
4) Apply 638 to the inside of the limiter cap, then install the cap so its stop prevents the pilot screw from turning counterclockwiseBe careful to avoid turning the pilot screw while installing the limiter capThe pilot screw must stay at its required setting position