2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 108Get this manual
BFBO-BFS.SO 2) Measure the resistance between the terminals This test can be made with the carburetor installed on the motorResistance 15.824.2
3) Install vinyl tube as shown
4) At room temperature, make sure that breath passes
through passage 5) Connect the 12 battery positive terminal to the Brown white terminal and negative to Blackgreen terminal for about five minutesThen check that breath does not pass through
VINYL TUBE
ePILOT SCREW REPLACEMENT