2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 96Get this manual
SFBO-SFS.SD 1) Apply marine grease to the water tube seal and set it to the mount case 2) Set the water tube in the place and secure the set plate and 12 mm flange bolt
SET PLATE
WATER TUBE
3) Apply grease to the inside of the lower mount rubber4) Install the lower mount rubber to the mount frame 5) Align the lower pinch bolt hole with the cutout on the mount frame as shown and loosely install the lower pinch bolt
BOLT HOLE
LOWER MOUNT RUBBER
6) Install the two 10 mm dowel pins onto the extension case 7) Apply sealant (Three bond #52228 or equivalent) to the sealing surface and install the extension case seal onto the extension case and assemble the extension case to the oil case8) Tighten the four 35 mm flange bolts to the specified torque