2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 92Get this manual
BFBO-BFS.SD THRUST WASHER
Select the shim (thrust washer or C) according to the engagement mark on the gear case
GEAR CASE
Engagement mark
Thrust washer
Thrust washer Thrust washer C
Thickness
2.53 mm (0.100 in) 2.56 mm (0.101 in)
40 mm SHIM
Sand types:
Select the 40 mm shim according to the engagement mark on the gear case
ENGAGEMENT
Engagement mark
GEAR CASE Shim type
Shim Shim Shim C
Thickness
0.08 mm (0.003 in) 0.10 mm (0 .004 in) 0.12 mm (0 .005 in)
1) Clean the taper roller bearing 2) ssemble the outer race and inner race of the taper roller bearing and turn the outer raceturns, then measure the bearing height from the outer race end to the inner race end as shown and record the measurement3) Cross-reference the bearing height and engagement mark on the gear case, and select the shim(s) of the appropriate thickness from the shim selection table