2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 74Get this manual
BFBO-BFS.SD fNEEDLE BEARING REPLACEMENT
1) Remove the water seal from the propeller shaft holder using commercially available seal remover2) Remove the needle bearing using the driver, attachment 22 24 mm and 17 mm pilot
TOOLS: Driver Attachment, 22 24 mm Pilot, 17 mm
ATTACHMENT, 22 24 mm
017490010000 017460010700 017460040400
PILOT, 17 mm
3) Press in new needle bearing with the 14.5 18.5 mm driver and 17 mm pilot using the hydraulic press Set the 17 mm pilot to the larger diameter side of the attachment as shown
DRIVER 14.5 18.5 mm
TOOLS: Driver, 14.5 18.5 mm Pilot, 17 mm