2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 62Get this manual
SFBCSFS.SD 6) Install the new fuel filter with the filter suspension attached so the arrow mark on the filter suspension points toward the fuel pump side7) Connect the fuel tubes and remove the hose clips8) Connect the fuel hose connector to the outboard motorPump the primer bulb, and make sure that there is no fuel leaks9) Reinstall the engine cover
FUEL PUMP SIDE
9FUEL TANK STRAINER
InspectionCleaning
A WARNING
Gasoline is highly flammable and explosiveYou can be burned or seriously injured when handling fuel Keep heat, sparks, and flame away Wipe up spills immediately1) Drain the fuel tank into suitable container2) Remove the fuel tank hose connector and fuel tank strainer from the fuel tank: Plastic tank: Remove the fuel tank connector by turning it in counterclockwise Steel tankRemove the two 18 mm flange bolts and fiber gaskets, then remove the fuel tank connector and gasket3) Remove any dirt or foreign material from the fuel tank strainer, and check for tears in the strainer mesh Replace the strainer if necessary4) Clean the fuel tank with cleaning solvent and allow the fuel tank to dry thoroughly5) Reinstall the fuel tank connector in the reverse order of removalMake sure that the -ring (plastic tank) or gasket (steel tank) is in good conditionreplace if necessary