2001-2014 Honda BF/BFP8D, BF/BFP9.9D Outboards Shop Manual, Page 56Get this manual
SFBD-SFS.SD - Adding Gear Case Oil
1) Remove the oil drain bolt, and install commercially available gear oil pump in the oil drain bolt hole2) Remove the oil check bolt, add gear case oil until it flows
CHECK BOLT
out of the oil level bolt holeRecommended gear case oil API standard GL-4 or GL-5 SAE #90 outboard motor gear oil
- Oil Change
1) Place the outboard motor upright2) Remove the oil check bolt, oil drain bolt, and drain the
OIL DRAIN BOLT
gear case oil into suitable container Check for water in the drained gear case oilIf there is water in the gear case oil, check the gasket and water seal for damage and check torque at each tightening point of the gear case3) Install commercially available gear oil pump or gear oil
bottle in the oil drain bolt hole
I Gear case oil
capacity
285 cc (9.6 fl oz)
,GEAR OIL BOTTLE or COMMERCIALLY AVAILABLE GEAR OIL PUMP