Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 209Get this manual
CAUTION Be carefu removing shift assembly Cover detent ball and spring with cloth They are under tension and may fly out5Pull shift assembly (bearing, shift gear, and shift shaft) from housing Remove detent ball and spring 6Disassemble handle by removing collar, felt washer, indicator (tape) and carefully prying cap off top of handle7Remove swivel by removing snap ring holding swivel to housing
Figure 3Removing Arms and Retaining PlateInspection and Repair
1Clean all metal parts in solvent 4Remove throttle gear assembly as follows2Check shift gear and shaft for wear3Check throttle gear for wear4Check detent spring5Check both throttle arm and shift arm6Discard felt washer7Examine plastic parts for cracking 8Check housing for cracks or other damage