Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 202Get this manual
Figure 27Removing Tilt Cylinder Head Assembly Figure 29Removing Power Trim Cylinder Cover
CPull piston with shaft from cylinder Figure 28 DRemove O-ring from headO- ring from groove in piston
SHAFT WITH PISTON
Figure 30Disassembling Trim Cylinder
Figure 28Removing Piston
Inspection and Repair
CAUTION
2Remove and disassemble power trim cylinder as follows: Internal parts have close tolerance and must be thoroughly clean to work correctly
ARemove hydraulic line from trim cylinder coverBRemove cover by removing five (5) screwsusing twelve point socketFigure 29 CRemove one cylinder seal from housing DPush piston with cylinder from cover