Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 173Get this manual
DPress seal in bore until sea bottoms outFigure 92Install water pump impeller in pump body3Clean gasket surface on gear hous ing coverInstall water pump gasket and plate on gear housing cover 4Place impeller drive key in slot in driveshaft5Slide water pump body assembly down driveshaft aligning slot in impeller with drive key in riveshaft6Apply sealant (Special Tool NoT 8983) to threads of four (4) water pump screwsInstall lockwashers and screws and torque to 70 in Ibs(80 kg cm) Figure 107Install waterline seal in bore of pu mp body 10Place exhaust snout on gear housing Apply sealant (Special Tool NoT 2963-1) to threads of ex haust snout screwsinstall screws and tighten securelyFigure 11
Figure 11Installing Exhaust Snout
11 Install shift rod pin through coupler and lower gear shift rod and secure with cotter pin
GEAR TRAIN