Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 139Get this manual
LOCATING PINS
AInstall one half of crankpin roller bearing cage in
connecting rod BApply light coating of grease on cage half, Special Tool NoT 2961and install seven (7) rollers Clnstall other half of cage on crankpin throwApply light coating of grease on cage halfInstall remaining nine (9) rollers DInstall rod cap on connecting rod so that ground part on cap meets ground part of rod Figure 48 EInstall screws and torque to 15 in Ibs(17.5 kg cm) 9Check for offset as follows :
Figure 45Locating Pins, Main Bearing