Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 128Get this manual
RemovalPower head from motor leg covers and support plate1Separate rear motor leg cover from front motor leg cover by removing three (3) screws on each side Figure 14Removing Rear Motor Leg Cover from Support Plate
Figure 13Removing Rear Motor Leg Cover from Front Motor Leg Cover3Remove support plate as fOllows2Remove rear motor leg cover as followsARemove three (3) screws on each side that secure rear motor leg cover to support plate Remove rear motor leg coverARemove seven (7) screws that hold support plate to front motor leg cover8 Remove support plateE v