Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 127Get this manual
3Remove two (2) transfer port covers and gaskets by removing four (4) screws securing each one to power headFigure 9 NOTE
Bracket with clip for spark plug wires is removed with bottom transfer port cover
4Remove exhaust port cover, plate and two (2) gaskets by removing twenty (20) screws securing them to power headFigure 10
Group screws by length 5Remove by-pass cover, gasket, spring and valve by removing two (2) screws securing cover to power head Figure 10
Figure 11Removing Thermostat, Thermos witch
8Remove cylinder head as followsARemove fourteen (14) screws securing cylinder head cover, cylinder head and cylinder head gasket to power head cylinderBRemove cylinder head cover from cylinder head by removing two (2) screws that hold cover to head