Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 89Get this manual
CRoute spark plug lead wires to spark plugs Figure 43DConnect white black striped lead and blue lead to stud terminals on housing and secure with lockwasher and hex nut7Install distributor belt as follows : ASlip belt over crankshaft
BInstall flywheelas outlined in this section CSlip belt over pulley and adjust belt tension, as outlined under timing 8Connect battery leads to battery
TIMING (75 AND 85 H.PONLY) NOTE
Figure 42Installing Cap to Housing
85 H.Pperformance modelssee special note, next page 1Disconnect battery leads from battery terminals 2Remove all spark plugs3Check position of timing decal on flywheel36 mark on decal must line up on top of the 36 line of flywheelIf it does not, reposition or replace decal See Figure 44Check by pressing down on decal with sharp object until the 36 line can be detected under the decal