Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 61Get this manual
Installation
Be careful not to scratch surfaces 1Clean all gasket surfaces2Assemble as follows :
AAssemble three (3) reed platesthree (3) gaskets
(reed plate adapter gaskets); deflector plate (reed plate adapter); intake manifold gasket and intake manifold (carburetor adapter flange) Figure 8BSecure this assembly with six (6) screws
Figure 9Installing Reed Valve, Intake Manifold Assemblies
5Install carburetors, intake and cover assembly Secure carburetors to intake manifold with six (6) nuts and secure intake with six (6) screws6Connect throttle linkage as followsAInstall throttle tie bar and secure with three (3) retaining ringsAdjust as previously outlined (Section BSnap throttle link onto towershaft and throttl camFigure 10Adjust as previously outlined (Section 7Install choke linkage as follows:
Figure 8Assembling Reed Valve, Deflector Plate and Intake Manifold