Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 51Get this manual
3Remove fuel bowl as follows: Figure 33 ARemove hex head screw and (small) gasket securing fuel bowl to carburetorBRemove fuel bowl (and second small gasket) from carburetorCRemove fuel carburetorbowl gasket from groove in
6Remove inlet needle and seat as follows: Figure 35
ARemove inlet needleBRemove inlet needle seat and gasket by turning seat counterclockwise
Figure 35Removing Inlet Needle SeatClnspect inlet needle for wear
Figure 33Removing Fuel Bowl
The needle must be repla-:::ed if there are any grooves on the seat surface Figure 36
4Remove main fuel jetFigure 345Remove float by removing groove pin and lifting float from carburetorFigure 34