Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 48Get this manual
BDisconnect throttle tie bar by removing retaining rings that secure tie bar to middle and bottom carburetor throttle arms Figure 24 NOTE
Throttle roller shaft and roller can be removed from arm by removing stop nutFigure 24
Figure 22Disconnecting Choke Linkage Hoses(Middle Carburetor)
4Slide hose clamp from each barb on fuel inlet fitting and remove fuel hoses from each barbRemove fitting5Remove two (2) hex nuts securing carburetor to carburetor adapter flange and remove carburetor RemovalBottom Carburetor1Remove carburetor intake with cover and three (3) gaskets by removing six (6) screws 2Disconnect throttle linkage as follows: