Chrysler 75 and 85 HP Outboards Service Manual OB 3646, Page 45Get this manual
4Close top carburetor choke shutter fullyWhile hold ing top carburetor choke shutter closedclose middle carburetor choke shutter and tighten middle carburetor choke swivel screw to secure link to swivelUse same procedure for choke shutter of bottom carburetor5Loosen two (2) screws securing choke solenoid just enough so that solenoid can be moved easilyFigure 13 carburetor easily or with slight drag If not, readjust solenoid position Step 710Release choke solenoid plunger and check to see that choke shutters are horizontalIf they are not and are tilted upward, bend choke lever tab which contacts carburetor casting until shutter is horizontalthen repeat step 9
OVERHAUL
GeneralA repair kit is availableIt includes body channel welch plug and cup plugtwo (2) cho ke shutter screws with lockwashers; idle screw springthrottle shaft return springfloat lever pinchoke shaft return springinlet needle, seat and gasketA complete carburetor gasket set is also available Removal
CAUTION
Do not allow fuel to contact hot motor parts when working on carburetorDisconnect carburetor