Chrysler 70, 75 and 85 HP Outboard Motors Service Manual OB 3438, Page 140Get this manual
Figure 49Installing Parting Line Seal Figure 51Installing Dowel Pins
Sealant dries quickly11 Apply sealant inside seal groove and on both sides of seal groove in areas of both upper and lower main bearings Special Tool NoT 8955Figure 50
CAUTION
Do not overtorque or undertorqueOvertorquing can cause warping Undertorqu ing can cause leakageDInstall boltstorque from center out to 270 inIbs (310 kg cm)
CRANKCASE BOLTSONE NUT" PARTING LINE SCREWS
Figure 50Applying Sealant
Figure 52Installing Crankcase Bolts, Parting Line Screws
12Install crankcase cover on cylinder as followsAInstall cover on cylinderBDrive in two (2) dowel pins to locate cover on cylinderFigure 51 CApply sealant to eight (8) threads of crankcase boltsSpecial Tool NoT 8983