Chrysler 70, 75 and 85 HP Outboard Motors Service Manual OB 3438, Page 126Get this manual
RemovalFuel System Components 1Disconnect and remove carburetorsthrottle and choke components as follows :
ADisconnect hose at bottom carburetor (to fuel pump) and hose at intake manifold (to intake cover) BLoosen two (2) nuts on choke solenoid bracket to free choke solenoid CRemove throttle tie bar by removing three (3) retaining rings DRemove throttle link
Figure 8Removing Fuel System, Starboard Side
RemovalCover Assembl ies
1Remove three (3) C-D studs with shock mounts2Remove follows: cylinder drain cover assembly as
ARemove cover, reed plate and gaskets by removing six (6) screws securing them to power head Figure 9Figure 7Removing Fuel System, Port SideERemove si (6) nuts securing carburetors and