Chrysler 70, 75 and 85 HP Outboard Motors Service Manual OB 3438, Page 37Get this manual

Chrysler 70, 75 and 85 HP Outboard Motors Service Manual OB 3438, Page 37

Reassembly and Installation1Instaii fuei pump cover as follows:
valves are positioned as shown in figures
When preSSing valves inbe sure that only the outer rim is in contact with the installation tool or damage could result3Install fuel pump body as follows :

AApply sealant to threads of impulse (air) hose fitting Special Tool NoT 8955Install fitting in cover and tighten securelyBInstall gasket and fuel pump cover on power head and secure with four (4) screwsFigure 7e Install impulse hose on lower fitting on cover
APosition fuel pump gasket and diaphragm on fuel pump bodyFigure 9
Figure 7Installing Fuel Pump Cover2Install fuel pump valve as follows :

Back to Chrysler 70, 75 and 85 HP Outboard Motors Service Manual OB 3438