Chrysler 70, 75 and 85 HP Outboard Motors Service Manual OB 3438, Page 12Get this manual

Chrysler 70, 75 and 85 HP Outboard Motors Service Manual OB 3438, Page 12

_ GENERAL SERVICE INFORMATION MOTOR IDENTIFICATION
Figure shows the motor serial number and model number, located on the identification plate attached to the support plateAlways use these numbers in correspondence to identify the motor and ensure that correct parts are obtained

Fuel SelectionAutomotive gasoline lead free, regular leaded or premium leaded having minimum octane number of 85 may be used See Table 1
WARNING

Gasoline is extremely flammable and highly explosive under certain conditions Do not fill fuel tank while motor is running Do not smoke or allow open flames or sparks near boat when refueling Mix fuel in well ventilated area
Outboard OilUse Chrysler Outboard Oil which is BIA certified TC-W OilWhen Chrysler Outboard Oil is not available, the following may be used Next choice Any other BIA Certified TC-W OilHigh quality SAE-40 Heavy Duty

For emergency outboard oil
FuelOutboard Oil MixWhen buying pre-mixed fuel make sure 50 to ratio is used To mix fuel with outboard oilproceed as follows :