Chrysler 6, 7.5, 180 Sailor Outboard Motors Service Manual, OB 3330, Page 98Get this manual
exhaust port and intake portsFigure 22 NOTE
Use one of the pistons to slide the ring in squarely
ACoat piston pin with oilApply few drops of oil to both piston pin holes in piston and to bearing in connecting rodBHeat piston to allow piston pin holes to expand and ease installation of piston pinClnstall piston pin through piston and rod bearing using piston pin punch (special tool T8919)
11111- FEELER GAUGE
When assembled properly, the open end of the piston pin is opposite the staking pins groovesFigure 23PISTON PIN
Figure 22Measuring Piston Ring Gap
BMeasure ring gap with feeler gaugeCReplace ring if end gap is not within limitations
OPEN END