Chrysler 6, 7.5, 180 Sailor Outboard Motors Service Manual, OB 3330, Page 63Get this manual
3Con nect the positive (+) lead of the extension wire to the positive (+) terminal on rectifier4Connect the negative (-) lead of the extension wire to the ground terminal on rectifier (labeled V) Also connect the rectifier ground wire to the same te rminal (v)Connect other end of rect ifier groun wire to screw on exhaust cover NOTE
The grounding point on the exhaust cover also secures the stator ground wire and one C-O module ground wire An internal tooth lockwasher should be in contact with exhaust cover when properly assembledFigure 185Connect the two alternator stator wires (green w yellow stripes) to the rectifier terminals (labeled 'Figure 18Figure 19Installation of Rectifier