Chrysler 6, 7.5, 180 Sailor Outboard Motors Service Manual, OB 3330, Page 61Get this manual
5Connect tester to female connect at engineAIf tester lights, stator is OK InstallationTo reinstall proceed as follows :
the alternator stator
BIf tester does not light, go to Step 66Disconnect extension wirestator lead splices7Connect tester to stator lead wiresAIf tester lights, stator is OKProblem was with the
1Position alternator stator on trigger stator and secure with two screwsFigure 162Route lead wires to port side notch of trigger stator, under loop of timing ring statorSecure to timing ring and other lead wires with ty-rapRoute wires down to floor of support plate leaving an adequate length to allow full travel of timing ring
splices (poor connection) BIf tester does not light, replace stator
CAUTION