Chrysler 6, 7.5, 180 Sailor Outboard Motors Service Manual, OB 3330, Page 16Get this manual
nn SPLINED SHAFT
Figure 9Lubricating Stern Bracket Bolt
Figure 10Lubricating Propeller Shaft
2Remove seal and push pin from propeller hub3Slide propeller from splined shaftIf propeller is frozen to shaft, tap gently with block of wood to loosen
BREAK-IN
Break-in-ProcedureFollow the break-in procedure as follows: 1Mix correct amount of CHRYSLER OUTBOARD OIL with each gallon of gasoline, refer to Table 3, FuelOil Mixture Requirements"
4Clean splined shaft and propeller hub bore thoroughly
5Lubricate propeller shaft splines with anti-seize
lubricant (Special Tool T2987-1)Figure 10