Chrysler 4 HP Outboard Motor Service Manual OB 2278, Page 42Get this manual
SECTION (Con't cRemove stern brackets, reverse lock, reverse lock spring and pin from swivel brackets
4-2Installing Swivel Bracket and Reverse Lock
APlace swivel bracket-port on motor legInstall reverse lock, pin and spring in swivel bracket-port as shown in figure 7
Shock mounts must seat properly in groove in swivel brackets
Figure 8Installing Swivel Brackets
STEERING FRICTION SCREW 08-25
5-1Removing Steering Friction Screw
ARemove swivel brackets as outlined in Section X, paragraph 4-lBRemove swivel friction shoe from friction screwRemove cotter pin from end of friction screw and remove friction screw from swivel bracket
Figure 7Installing Reverse Lock
BPlace swivel bracket-starboard on motor leg, aligning shock mounts with groove in swivel bracket and reverse lock pin with hole in swivel bracketstarboard(See figure CApply sealant (Special Tool T8983) to threads of swivel bracket screwsInstall screws and tighten securelyDInstall stern brackets as outlined in Section X, paragraph 3-239