Chrysler 4 HP Outboard Motor Service Manual OB 2278, Page 20Get this manual
SECTION VIMAGNETO 1FLYWHEEL 03-11
ARemove flywheel as outlined in Section IV, paragraph 2-21-2Install flywheel as outlined in Section IV, paragraph 2-23-2Installing Stator Plate APlace throttle cam and throttle lever on stator plate and secure with screws and lockwashersBPlace stator on powerheadCAttach ground lead from stator plate to boss on parting lineRoute remaining ground lead down under carburetor adapter and carburetorConnect to terminal on shorting switchSee figure 2
1-1Removing Flywheel
LAPPING FLYWHEEL 03-19
ALap flywheel as outlined in Section IV, paragraph 2-2STATOR PLATECOMPLETE 03-12
ARemove flywheel as outlined in Section IV, paragraph 2-2BDisconnect spark plug lead wire from spark plugCLoosen friction screw as shown in figure 1DRemove ground lead from shorting switch and ground lead from crankcase coverLift stator plate from engine