Chrysler 25 and 30 HP Outboard Motors Service Manual OB 1894, Page 82Get this manual
SECTION XIV (Cont 11-2 Installing Exhaust Gasket (Lower)
AInstall exhaust gasket lower and motor leg as outlined in Section XIII, paragraph 33-2 (25 H.P or paragraph 34-2 (30 H.P 12GEAR SHIFT LEVER
12-1 Removing Gear Shift Lever
DOn 30 H.Pengines, insert detent spring and ball in hole in transfer port coverEInstall shift lever, then flat nylon bearing on studFSecure shift rod upper to shift lever with washer and cotter pinGSecure shift lever to stud with stop nut13SHIFT INTERLOCK LEVER
13-1 Removing Shift Interlock Lever
ARemove nut securing shift lever to stud on transfer port coverBRemove cotter pin and washer securing shift rod upper to shift leverRemove shift lever with two (2) nylon bearingsOn 30 H.Pengines, remove detent ball, and detent springRemove wavy washer from shift rod upper
ARemove transfer port cover as outlined in Section XIV, paragraph 7-1BUnscrew shift interlock lever pivot from crankcase coverRemove lever13-2 Installing Shift Interlock Lever