Chrysler 25 and 30 HP Outboard Motors Service Manual OB 1894, Page 66Get this manual
SECTION XIII (Cont CPosition reverse lock in reverse lock bracket and pin them together with medium length pin and retaining ringsDInstall reverse lock spring as outlined in Section XIIIparagraph 20-222SWIVEL BRACKET 25-08-30, 30-08-24 SWIVEL BRACKET BEARINGS 25-08-31, 30-08-25
22-1 Removing Swivel Bracket and Bearings
Figure 10 -
Checking Reverse Lock Spring Tension
21REVERSE LOCK 25-08-32, 30-08-26 REVERSE LOCK BRACKET
21-1 Removing Reverse Lock
ARemove shock mount covers as outlined in Section XIIIparagraph 6-1 (25 H.P or paragraph 7-1 (30 H.PBLay engine on floorCRemove nut securing friction shoe armRemove arm and shoeDRemove two (2) screws fastening shock mount (upper thrust) to kingpin plateERemove two (2) nuts fastening kingpin plate to shock mounts (upper side)FRemove magneto control shaft gear as outlined in Section XIIIparagraph 3-1Push magneto control shaft back out of kingpin plateGRemove kingpin plate and swi vel bracket assembly from enginePull swivel bracket with "0" ring (and spaceron25H.Pmodels) off kingpinHRemove swivel bracket bearings1Remove reverse lock spring as outlined in Section XIIIparagraph 20-1JRemove reverse lock as out-