Chrysler 25 and 30 HP Outboard Motors Service Manual OB 1894, Page 60Get this manual
SECTION XIII (Cont raised neck upAlign bolt inside each cover with slot in plate of shock mount (lower thrust)Tighten boltsNOTE
Apply Anti-Seize (Special Tool T2987-1) to all bolt threadsBInstall two (2) bolts and nuts to secure covers to kingpin8SHOCK MOUNT (LOWER THRUST) 25-08-25, 30-08-18 SHOCK MOUNT (LOWER SIDE) 25-08-26, 30-08- 19
8-1 Removing Shock Mounts
Loosening Shock Mount Screw
lowerTighten each screw (refer to figure 3)NOTE
ARemove shock mount covers as outlined in Section XIIIparagraph 6-1 (25 H.P or paragraph 7-1 (30 H.PBRemove two (2) screws securing
Apply Anti-Seize (Special Tool T2987-1) lubricant to threads of all screws and bolts before reinstalling to prevent threads from "freezing" in screw holesBInstall two (2) bolts and nuts to
shock mount (lower thrust) to motor leg and remove shock mountCUnscrew