Chrysler 25 and 30 HP Outboard Motors Service Manual OB 1894, Page 47Get this manual
SECTION (Cont
up and towards gap between pawl guidesEPlace pawl plate on arbor with pawl lever side toward pulley and slots over ends of pawl plate spring (see figure 2)
1Install starter as outlined in Section X, paragraph 2-13SPRING (STARTER REWIND) 06-20
3-1 Removing Rewind Spring
ARemove pulley as outlined in Section X, paragraph 2-1BRemove spring from housing3-2 Installing Rewind Spring
Pawl Plate Assembly
ALeave retainer on new spring until installed (skip to step D)Install old spring as outlined belowBGrease spring (use Special Tool