Chrysler 25 and 30 HP Outboard Motors Service Manual OB 1894, Page 23Get this manual
SECTION VII- FUEL SYSTEM 1SEDIMENT BOWL 04-13 FILTER (SCREEN) 04-12
1-1 Removing Sediment Bowl and Filter
DConnect fitting on bowl to the hose that is attached to bushing on support plateSecure with hose clamp2FUEL PUMP BODYCOMPLETE
2-1 Removing Fuel Pump Body
ALoosen screw on plastic sediment bowl and remove bowl (see figure
ARemove fuel lines from pump body and sediment bowlBRemove six (6) screws securing pump body to transfer port coverIf necessary, pry between upper screw holes where gasket is recessed2-2 Installing Fuel Pump Body
APlace new gasket on pump body and secure body to transfer port cover with six (6) screwsFigure Removing Sediment Bowl
BRemove filter (screen)CRemove rubber gasket from fuel pump bodyDSlide hose clamp from fuel line fitting using hose clamp pliers (Special Tool T8900)Remove fuel lineCAUTION
BInstall fuel lines; bushing line to sediment bowl, carburetor line to fuel pump body3FUEL PUMP DIAPHRAGM 04-15