Chrysler 20 and 30 HP Outboard Motors Service Manual OB 3435, Page 76Get this manual

Chrysler 20 and 30 HP Outboard Motors Service Manual OB 3435, Page 76

Figure 14Removing Stator Screws Figure 16Disconnecting Stator Leads
3Disconnect stator leads as followsADisconnect two (2) green yellow stripe leads from rectifierFigure 15
AWARNING
Wear safety glasses when using compressed airCleaning and InspectionUse brush or compressed air to clean the stator windings, poles and laminationsClean dirty pole laminations with No400 or finer sand paperInspect for loose connections or burnt insulation at the point where the lead wires connect to polesInstallation1Attach stator leads as follows :

Back to Chrysler 20 and 30 HP Outboard Motors Service Manual OB 3435