Chrysler 20 and 30 HP Outboard Motors Service Manual OB 3435, Page 52Get this manual
116" 32" (1.588.794 mm)
Figure 35Float, Drop Adjustment10Install fuel bowl as follows:
AInstall new gasket on carburetor body
Figure 33Installing Float
BPlace float bowl on carburetor8Check float height as follows :
AHold fuel bowl upside down and check to see if top of float is parallel with top of fuel bowl
CInstall retaining screw with one gasket on each side of float bowl, and torque screw to 2025 in Ibs(2328 kgcm) Figure 36
BAdjust float height by bending metal tab that touches inlet needle Figure 34
CAUTION