Chrysler 20 and 30 HP Outboard Motors Service Manual OB 3435, Page 39Get this manual
DOuter valves are pressed into their respective locations unti they "bottom out" Be su re that the valves are positioned as shown in figures NOTE
When pressing valves in, be sure that only the outer rim is in contact with the installation tool or damage could result 3Install fuel pump body as follows :
APosition fuel pump gasket and diaphragm on fuel
pump body Figure 7
Figure 8Installing Fuel Pump Body
SCREEN (TURNED EDGE)
Figure 7Assembling Fuel Pump Body
BInstall fuel pump body on fuel pump cover and secure with six (6) screws Figure 8C Push fuel line (from carburetor) on outlet fitting on fuel pump body and secure with hose clamp 4Install sediment bowl as follows: