Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 212Get this manual

Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 212

Section
_ REMOTECONTROL
Removal1Disconnect battery2Remove remote control unit by removing three (3) wood screws Figure 1BRemove two (2) flat head screws securing junction board to housingFigure 2

Figure 2Disconnecting Remote Control Cables(Throttle Cable Shown Off) Figure 1Removing Remote Control
3Disconnect throttle cable as follows: ARemove cotter pin from throttle cable terminalBRemove throttle cable clamp by removing two (2) fill head screws holding clamptoswivelFigure2 Disassembly1Remove throttle arm by removing hex bolt and lockwasher securing arm to housing4Disconnect shift cable as follows :

Back to Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439