Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 206Get this manual
Figure 27Removing Tilt Cylinder Head Assembly Figure 29Removing Power Trim Cylinder Cover
CPull piston with shaft from cylinderFigure 28DRemove O-ring from head, O-ring from groove in piston
Figure 30Disassembling Trim Cylinder
Figure 28Removing Piston
Inspection and Repair
CAUTION
2Remove and disassemble power trim cylinder as followsARemove hydraulic line from trim cylinder cover BRemove cover by removing five (5) screwsusing twelve point socketFigure 29 Remove one cylinder seal from housing DPush piston with cylinder from cover EPush piston from cylinderFigure 30FRemove other cylinder seal from cover, piston seal from piston, and piston shaft seal from bore in cover205