Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 104Get this manual
Cleaning and InspectionUse brush or compressed air to clean the stator windings, poles and laminations Clean dirty pole laminations with No400 or finer sandpaperInspect for loose connections or burnt insulation at the point where the lead wires connect to poles 3Remove three (3) screws securing regulatorrectifier to power head
Cleaning and InspectionVisually inspect bakelite body for cranksCheck terminals for looseness and corrosionRemove corrosion with file or emery cloth Installation1Install regulator rectifier with three (3) screws
A WARNING
Wear safety glasses compressed airwhen working with
2Connect lead wires to regulator rectifier Figure 123Reconnect battery
Installation1Position stator on the bearing cage and align screw holes2Insert the stator mounting screws and tightenFigure 11