Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 88Get this manual
CRemove ground wire from housing by removing screw and lockwasher that secures it to housing Remove preamplifier as follows :
ARemove premaplifier leads from terminals on
housing Figure 35BRemove two screws and lockwashers securing preamplifier to housingRemove preamplifier Figure 35
Figure 33Removing Pulley and Shaft
3 Remove distributor bracket as follows :
ARemove screw and lockwasher securing ground
lead to bracketBRemove retaining ring with ring pliersSpecial Tool NoT 1082Figure 34 Slide distributor bracket and thrust washer off housingCRemove shims from housing Figure 35Removing Preamplifier