Chrysler 100, 115 and 140 HP Outboard Motors Service Manual, OB 3439, Page 14Get this manual
LUBRICATION POINTS GeneralTo insure proper operation of this motor,
Adding Gear Housing LubricantPlace motor in
normal operating position 1Remove fill plug and washer and insert nozzle of tube into fill hole Figure 22Remove vent plug and washer3Add lubricant until it appears at vent hole 4Install vent plug and washer
all points requiring lubrication must be serviced with the correct lubricant at the proper time intervalRefer to Table and proceed as follows :
Gear HousingLubricant Level CheckPlace motor
in normal operating position
SRemove nozzle and replace fill plug and washer
WARNING