2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 388Get this manual
ELECTRICAL SYSTEM 14-29 Electric Starter System
Install the O-rings [A] and the washers [B] as shown
J N0 60 10B I
Fit the tongue [A] on the brush plate into the end cover groove [B]
Align the lines [A] on the yoke with the lines [B] on the both end covers Replace the starter motor through bolts [C] with new ones Tighten :
TorqueStarter Motor Through Bolts: 6.4 Nm (0.65 kgf.m56 inlb)
JtlOli80l P
W CICI CICI
Brush Inspection
Measure the length [A] of each brush If any is worn down to the service limit, replace the negative brush assembly [B] and the positive brush assembly [C]