2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 381Get this manual
14-22 ELECTRICAL SYSTEM Battery
Take the electrolyte container out of the vinyl bag Detach the strip of cap [A] from the container
0 00 not discard the strip of cap because it is used as the battery plugs latera 00 not peel back or pierce the seals [8] on the container(jPOg Oa06S 1
Place the electrolyte container upside down aligning the six seals with the six battery filler ports Push the container down strongly enough to break the seals Now the electrolyte should start to flow into the battery
0 00 not tilt the container as the electrolyte flow may be interrupted
Check the electrolyte flowIf no air bubbles [A] are coming up from the filler portsor if the container cells have not emptied completely, tap the container [6] few times Keep the container in place for 20 minutes or moreDon 't remove the container from the battery until it is empty, the battery requires all the electrolyte from the container for proper operation