2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 333Get this manual
12-18 STEERING Reverse System
Shift Cable Adjustment
Check the shift cable adjustment When the shift lever is in the "F" positionthe lower edge [AJ of the bucket should be held above the top [BJ of the steering nozzle with slight play so it doesn't interfere with the water flow from the jet pump When the shift lever is in the "R" positionthe lower stopper [C] on the bucket should rest against the bottom [OJ of the pump cover
If either position is incorrect, adjust the shift cable Put the shift lever in the "R" position Loosen the locknut [AJ at the end of the shift cable Slide back the outer sleeve and take the ball joint [BJ off the ball Turn the ball joint on the cable to adjust the shift cable Connect the ball jOint and check the cable adjustment again When adjustment is correct, tighten the shift cable locknut