2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 330Get this manual
STEERING 12-15 Steering
Remove the bolts and nut tightening plate (special tool) Loosen the steering shaft nut so that threads [A] of steering shaft nut are aligned with the holes [B] of plate [C] within second chance Tighten the bolts [0] and check steering shaft turns freely with no play
JL 06 18 S2
Torque the steering shaft locknut [A] TorqueSteering Shaft Locknut: 4959 Nm (5.06.0 kgf.m3644 ftlb)
Turning the steering shaft fully in left and right direction, check whether the steering position sensor comes in contact with the magnet Check the clearance [A] between the steering position sensor [B] and the magnet [C] with feeler gauge Steering Position Sensor Clearance Standard: 0.51.5 mm (0.020.06 in