2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 329Get this manual
12-14 STEERING Steering
Install the steering shaft Tighten the steering shaft nut [A] by hand and then loose one time
Jl06016B S2 C
Put the nut tightening plate [A] on the steering shaft nut [8] Fasten the plate with two bolts [C] Special Tool- Nut Tightening Plate: 57001-1698 Put the square portion [D] of the torque wrench on the square portion of the plate Torque (2 .6 Nm, 0.27 kgfm23 inlb) the plate with nutTorqueSteering Shaft Nut: 29 Nm (0.3 kgfm, 173 inlb)