2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 323Get this manual
12-8 STEERING Handlebar
Handlebar Removal
Unscrew the mounting screws [A] and remove the handlebar pad [8]
Remove the inner pad [A] and the buzzer [8]
Unscrew the bolts [A] and remove the pad holder [8]
Take out the throttle case clamp screws and remove the throttle case [A] Take out the switch case clamp screws and remove the switch case [8] Cut off the clamps [C] holding the switch leads and throttle cable Unscrew the handlebar clamp bolts [0] and remove the handlebar clamps [E] and handlebar [F)