2007-2010 Kawasaki Ultra 250X/260X/260LX PWC Factory Service Manual, Page 322Get this manual
STEERING 12-7 Steering Cable
Steering Cable Installation
Slide short piece of rubber or plastic tubing over the front cable end to guide the cable through the hull Lubricate the outside of the new cable to ease cable installation Torque:
TorqueSteering Cable Nut: 39 Nm (4.0 kgf.m29 ftlb)
Align the groove [A] on the steering cable with the opening portion [B] on the cable bracket as shown Install the steering cable both end to the jointsThe steering cable rod ends must be inserted to the joints minimum of mm (0.2 in Apply non-permanent locking agent to the cable joint bolt and the steering cable bracket mounting boltsTorqueCable Joint Bolt: 9.8 Nm (1.0 kgfm, 87 inlb)